RAK Wireless Solar Unify Enclosure Case IP67 150x100x45mm

RAK Wireless Solar Unify Enclosure Case IP67 150x100x45mm + pre-mounted M8 5 Pin + RP-SMA connector PID: 910421 The 150x100x45mm enclosure has enough internal space to support the following WisBlock Base Boards - RAK19001 and simultaneously a RAK19003, RAK19007, RAK5005-O. There is also space for a flat profile LiPo battery to be hosted under an internal mounting plate. The space available below a mounting plate in standard configuration is approximately 107x57x6mm excluding narrow sections where there are enclosure features. The variant with pre-mounted M8 5pin connector(IP rated) and RP-SMA (IP rated) antenna connector offers to use the enclosure with external antenna and the option to supply the WisBlock solution with 5V through the M8 connector or connect a solar panel to recharge a battery inside the enclosure (optional, battery is not included). The M8 connector is a 5 pin variant with 2 pins for 5V or solar panel power supply and 3 pins for input or output signals. The cable inside the enclosure comes pre-mounted with a matching connector to the solar panel connector of the WisBlock Base Boards. The remaining 3 pins are with solder-ready end points. Package Inclusion 1 pc Unify Enclosure 150x100x45mm (with Solar/without Solar) 1 pc Mounting Plate (as per option selected) 1 Screw set 1 pc M8 Cable (if you choose with solar enclosure） 1 pc Ipex to RP-SMA Cable (if you choose with solar enclosure）