HYPER TOUGH GFCI Receptacle Tester Detect Faults in 3-Wire Receptacles TD35091B

This Hyper Tough GFCI Receptacle Tester is designed to detect the most common wiring problems in standard and GFCI receptacles. A ground fault circuit interrupter [ GFCI ] is an electrical safety device that shuts off power to prevent electric shock and electrocution. GFCIs are often installed in areas where water and electricity are close together, like kitchens and bathrooms. A convenient chart on the tester helps determine wiring condition in outlets based on LED light results. Conditions Indicated Are: Open Ground Open Neutral Open Hot Hot & Ground Reversed Hot & Neutral Reversed Correct Notes & Warnings The Tester Does NOT Perform a Comprehensive Test It Only Checks for Probable Common Improper Wiring Conditions The Tester Will NOT Detect 2 Hot Wires in a Circuit The Tester Will NOT Indicate Reversal of Grounded and Grounding Conductors The Tester Will NOT Indicate the QUALITY of the Ground Connection The Tester Will NOT Detect a COMBINATION of Defects The GFCI Tester will make a nice addition to your tool kit with a performance you can count on. It has a compact size for easy storage when not in use. General Specifications Operating Voltage AC 95V ~ 125V Operating Frequency 60Hz Operating Temperature 0°C - 40°C | 32°F - 104°F | Relative Humidity < 80% Storage Temperature -10°C - 45°C | 14°F - 113°F | Relative Humidity < 80% Size 81mm x 40mm x 31mm | 3.19" x 1.57" x 1.22 Weight ~ 39g | 0.09lb [ ~1.44 ounces ] E5175