Alpha Q Pro carbon fork 1 1/8" steerer tube made by true temper

1. Steerer tube is 360mm measuring from the crown race to top of steerer tube. 2. Fork is designed for 700 c tires. 3 Fork is designed to have short pull side pull brakes like dura ace , ultegra and 105. 4. In 6th pictured using a 700x23 tire pumped up to 120PSI it has 3/16" of clearance between the top of tire and inside bottom of the fork as so it's posible that a 700x25 tire could be used but can't promise that you'll need to measure that yourself to be sure would of done that myself but didn't have a 700x25 tire to try it with. 5. Fork weighs in at 537 grams. 6. Steerer tube wall is slightly thicker then 1/8" as seen in pictures 7 and 8 also in those pictures you can see the aluminum sleeve that is epoxied into the steerer tube instead of a star nut seeing that this is such a long steerer you'll probably end up cutting the steerer down to fit your bike so you can just use a star nut after cutting it down. 7. In the last picture there is a slight groove in the steerer tube from the headset its not much but its there so I'm mentioning it..