32''W x 21''D x 3''H Pull Out Cabinet Drawer Soft Close Slide Out Wood Organizer

•The outer width of the wooden part of drawer is 31 inches, the depth is 21 inches, and the height is 3 inches. When adding the 1-inch width of the slide rails, the total width becomes 32 inches. the inner width of this drawer is 29.7 inches, the inner depth is 19.7 inches. There is only a 0.375 inch height between the bottom of the drawer and the ground. Bottom installation is workable only when the frame height is less than 0.375 inches. Subtract the width of the hinge when measuring •When installing it at the bottom, ensure your cabinet has a width greater than 32.5 inches, a depth greater than 21.5 inches, and a height greater than 3.5 inches. •When installing it at the side, make sure the width is 32 inches, and the depth must between 21~23 inches and height must be greater than 3.5 inches. The wooden part of the drawer comes fully assembled with metal pre-drilled holes •Measuring Width: Open your cabinets as narrow as they can get. Measure the narrowest width of the cabinet. Measuring Depth: Measure both the left and right sides. Use the smaller measurement. Measure every place where you plan to put a slide out. Think about things like pipes, or other stuff that can change the depth. Measuring Height: Measure from the bottom of the frame to the top on both the left and right sides. Pick the shorter measurement •Equipt with soft-close slides for a quiet operation, and can support up to 60 lbs. 5/8" thick knotless solid wood, and has a double-layer natural clear coat.